What should I do if water enters the lifting stage during use

Water ingress into the lifting stage can easily have a negative impact on its performance, affecting the normal operation and functioning of the hydraulic system, especially when installed on the lifting stage. For customers in southern China, the impact is particularly significant during the rainy season every year. To address this common issue.

1. When the lifting stage is flooded, the motor may burn out. In this case, the power switch should be immediately turned off and the accumulated water in the pit should be cleaned up.

2. Try to keep the lifting stage high in the front and low in the back, which is beneficial for draining the water entering the exhaust pipe and avoiding damage to the converter.

3. The oil condition of each system of the lifting stage should be checked. If white foam or turbidity is found in the oil, it should be replaced in a timely manner.

After the inspection is completed, Jinan Kainuote lifting stage manufacturer reminds you to use a compressed air machine to blow dry all the electrical connection components inside the head compartment, in order to prevent moisture from accumulating in the electrical connection parts and causing corrosion.

5. If water has entered the motor of the lifting stage, the motor should be removed and disassembled so that the water can evaporate quickly. This is a very fast dehumidification method in summer.

6. The components of the chassis are prone to lubricating oil deterioration during water immersion, especially in steering, transmission and other systems. The chassis should be disassembled and inspected